How To Replace The Saws - Nogueira FTN-2500 Manual De Instrucciones

machine toolbox, remove the safety pin
(H) that is broken;
NOTE: Generally, the broken pin is located in
the biggest gear's shaft.
Install a new safety pin;
5.
Using a compression punch, crimp
6.
the pins' ends so that they are tightly-
mounted;
Replace the gearbox (F), the gears (E), the
7.
cover (D), close the platform fairing (B)
and replace the bolt (A).

6.9- How to replace the saws

The saws blades (B) are made up of 6
independent segments. In case of breakage
or wear, the segments can be replaced
individually as follows:
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Remove the 6 bolts, nuts and washers (C).
1.
Replace the saw segment with a new one.
2.
Secure the saw segment with the 6 bolts,
3.
nuts and washers (C).
CAUTION!
For your safety, lift and wedge the front of
the machine using a suitable wedge.
There is a risk of injury when handling the
saws without using suitable gloves. The use
of PPE is mandatory.
B
Instructions Manual
6. Maintenance
H
C
95