Additional Information - Zodiac eXPERT Manual De Instalación Y De Uso

• Press (see number of required presses in the following table) to access the desired function.
Number
of Screen display
presses
0
1
2 reverse direct
3 flow
4 flow cell
5 cover
6 pH intelligent
7 i n i pH
pump
8
stop
auto
9
Cl mV
10 Cl EXT
11
12
13
14 b i o
Settings
N/A N/A
N/A N/A
25
Function
• Shows the appliance model
• Displaying and resetting the
number of operating hours of the
cell or the pH pump
Shows the software version in use
Polarity reversal cycles adjustment
Activation of the flow switch
Activation of the gas sensor
Activation of "Pool cover" mode
Activation of "Intelligent pH" mode
Activation of the "Initialisation"
mode for pH regulation
Setting the pH pump over feed
alarm triggering
Activation of the automatic ORP
regulation
Activation of Slave mode
Setting the "Temperature" alarm
triggering
Setting the "Salinity" alarm
triggering
Activation of the user interface
power saving mode
Activation of "Bio pool" mode for
natural pools
Calibrating the temperature
Calibrating the salt concentration

Additional information

• See § «4.3.2. Appliance information»"
• See § «4.3.3. Displaying and resetting the
number of operating hours of the cell or
the pH pump»"
• See § «4.3.2. Appliance information»"
See § "4.3.4. "Reverse direct": Reversal
adjustment for cell cleaning"
See § "4.3.5. "Flow": Activating the flow
switch"
See § "4.3.6. "Flow cell": Activating the gas
sensor"
§ "4.3.7. "Cover": Connecting a pool cover"
§ "4.3.8. "Intelligent pH" mode"
§ "4.3.9. "Ini pH": Initialisation of pH
regulation"
§ "4.3.10. "Pump stop": pH pump stop over
feed alarm (pH - PH/ORP models)"
§ "4.3.11. "Auto Cl mV": Automatic ORP
regulation (pH/ORP models)"
§ "4.3.12. "Cl EXT": Slave mode"
§ "4.3.10. "Pump stop": pH pump stop over
feed alarm (pH - PH/ORP models)"
§ "4.3.14. Setting the "Salinity" alarm
triggering "
§ "4.3.15. User interface energy saving
mode"
§ "4.3.16. "Bio": "Bio pool" mode for natural
pools"
See § "4.3.17. Calibrating the temperature"
See § "4.3.18. Calibrating the salt
concentration"