Zodiac eXPERT Manual De Instalación Y De Uso página 73

4.3.13. Setting the "Temperature" alarm triggering
When the measured temperature is outside the configured range, an alarm
range is 5°C - 40°C. To adjust it:
• From the Configuration/
• Press or to adjust this value (select 0 to deactivate the alarm).
• Press to confirm: the maximum value (indicated by "HI") flashes.
• Press or to adjust this value.
• Press to confirm.
4.3.14. Setting the "Salinity" alarm triggering
When the water's measured salt concentration is outside the configured range, an alarm
recorded default range is 2.5 g/L - 8 g/L). To adjust it:
• From the Configuration/
• Press or to adjust this value (select 0.5 to deactivate the alarm).
• Press to confirm: the maximum value (indicated by "HI") flashes.
• Press or to adjust this value.
• Press to confirm.
mode, press : the minimum value (indicated by "LO") flashes.
mode, press : the minimum value (indicated by "LO") flashes.
is displayed. The recorded default
is displayed. The
EN
30