Unlocking The Screen - Zodiac eXPERT Manual De Instalación Y De Uso

Water temperature display
ORP mV display (shows chlorination efficiency)
Setpoint display
Chlorination is off (setpoint = 0%)
Measured temperature too high or too low (non-blocking)
Measured salt concentration too high or too low (non-blocking)
Measured pH too high or too low (non-blocking)
Measured ORP value too high or too low (non-blocking)
Values too high
Values too low
pH pump stopped
pH pump fuse blown
Cell damaged or calcified
Water flow problem
4.1.2. Unlocking the screen
After a while whitout any use, chlorinator user interface goes into standby display to save energy (depending on the
setting in the configuration menu). To wake it up, screen needs to be unlocked :
• Slide your finger across the unlocking zone (
ALARMS
) to the edge of the screen.
EN
22