2.5 I Installing the control box
2.5.1. Placement of the control box
The control box must be installed in a dry ventilated technical room protected against frost, with no pool
•
maintenance products or similar products stored nearby.
The control box must be installed at a distance of at least 3.5 m from the outside edge of the pool. Always
•
comply with the installation codes and/or laws applicable at the place of installation.
It must not be installed more than 1.6 metres from the cell (maximum cable length).
•
If the box is fixed to a post, a watertight panel must be fixed behind the control box (350x250 mm
•
minimum):
Secure the mounting (provided) to the wall or to the watertight panel using screws or wall plugs (not
-
provided) (figure
Clip the top of the control box into the mount (figure
-
15
).
).