Maintenance; Safety Instructions; Functional Check; Table Of Functional Checks - Steelcase Solo Sit-to-Stand Desk Instrucciones De Uso

_______________________________________________________________
7

Maintenance

7.1 Safety instructions

Only use suitable tools for all these
operations.
A damaged mains cable must be replaced
by the manufacturer, the manufacturer's
customer service staff or similarly
qualified personnel to prevent hazards.

7.3 Table of functional checks

Interval Inspection point
During assembly Frame parts
Before each Immediate
height adjustment environment of the
desk
Desktop
Regularly Connections of the
electrical supply lines
(cables)
Insulation of the
electrical supply lines
(cables)
Surroundings of the
electrical supply lines
(cables)
Table
7-1: Functional checks
157238

7.2 Functional check

The components of the Solo Sit-to-Stand Desk
must be checked for correct functioning at regular
intervals. Pay particular attention to the electrical
connections:
Functional check
Lifting column position
Check safety distance
Check for horizontal
alignment
Check the insulation for
damage
Check the insulation for
damage
Check clearance to hot
objects (e.g. radiators)
■ The electrical equipment of the desk
must be checked regularly. Fix loose
connections or damaged cables
immediately.
■ Attach or detach connectors only
when the equipment is de-energised.
■ The plug of the desk must be easily
accessible at all times.
Required condition Measure (if required)
Lifting columns

completely inserted
and screwed into the
horizontal structure
No objects in the

lifting range
Horizontal

No damage

No damage

Sufficient distance

Maintenance
Unscrew screws, insert
lifting columns correctly
(direction and cable!) and
tighten the screws
Remove any objects
Align using the adjusting
screws on the feet
Replace the connections
Replace the cables
Establish distance
15