General Information; Symbols Used In This Document - Grundfos ALPHA2 Instrucciones De Instalación Y Funcionamiento

his obligations under this paragraph. The seller's
liability for breach of these warranties (or for
breach of any other warranties found by a
competent court to have been given by the
seller) shall be limited to: (a) accepting return of
such equipment exw plant of manufacture, and
(b) refunding any amount paid thereon by the
purchaser (less depreciation at a rate of 15 %
per year if the purchaser has used the
equipment for more than thirty [30] days), and
canceling any balance still owing on the
equipment, or (c) in the case of service, at the
seller's option, redoing the service, or refunding
the purchase order amount of the service or a
portion thereof upon which such liability is
based. These warranties are expressly in lieu of
any other warranties, express or implied, and
the seller specifically disclaims any implied
warranty of merchantability or fitness for a
particular purpose, and in lieu of any other
obligation or liability on the part of the seller,
whether a claim is based upon negligence,
breach of warranty or any other theory or cause
of action. In no event shall the seller be liable for
consequential, incidental, indirect, special or
punitive damages of any kind. For the purposes
of this paragraph, the equipment warranted shall
not include equipment, parts and work not
manufactured or performed by the seller. With
respect to such equipment, parts or work, the
seller's only obligation shall be to assign to the
purchaser the warranties provided to the seller
by the manufacturer or supplier providing such
equipment, parts or work. No equipment
furnished by the seller shall be deemed to be
defective by reason of normal wear and tear,
failure to resist erosive or corrosive action of any
fluid or gas, the purchaser's failure to properly
store, install, operate or maintain the equipment
in accordance with good industry practices or
specific recommendations of the seller,
including, but not limited to the seller's
installation and operation manuals, or the
purchaser's failure to provide complete and
accurate information to the seller concerning the
operational application of the equipment.
4

2. General information

2.1 Symbols used in this document

DANGER
Indicates a hazardous situation which,
if not avoided, will result in death or
serious personal injury.
WARNING
Indicates a hazardous situation which,
if not avoided, could result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation which,
if not avoided, could result in minor or
moderate personal injury.
The text accompanying the three hazard
symbols DANGER, WARNING and CAUTION
will be structured in the following way:
SIGNAL WORD
Description of hazard
Consequence of ignoring the warning.
- Action to avoid the hazard.
Example
DANGER
Electric shock
Death or serious personal injury.
- Switch off the power supply before
starting any work on the product.
Make sure that the power supply
cannot be accidentally switched on.
A blue or grey circle with a white
graphical symbol indicates that an
action must be taken to avoid a
hazard.
A red or grey circle with a diagonal
bar, possibly with a black graphical
symbol, indicates that an action must
not be taken or must be stopped.
If these instructions are not observed,
it may result in malfunction or damage
to the equipment.
Notes or instructions that make the
work easier and ensure safe
operation.