Adjustment Of Braking Light Switch - Serpento SPIRIT 250 Manual De Usuario

Adjustment of Braking Light Switch

The braking light should be lit up on time as soon as the rear wheel is braked. If not, regulation shall be made by turning the adjusting nut.
With the braking light switch in "ON" position, the braking light should be lit up. If not, check should be carried out to see whether the braking
lamp, circuit and switch work normally, Make replacement if needed.
Caution:
For the adjustment of the braking light switch, the brake needs to be first checked to make sure that the free operating movement is ensured
within the specified range.
• SPIRIT 250
MANUAL DEL USUARIO
27