Liquid Level Check-Up - Serpento SPIRIT 250 Manual De Usuario

• SPIRIT 250
MANUAL DEL USUARIO
Note:
The stop lamp should be on timely when do stop-checkup after adjustment.
20-30mm

Liquid level check-up

Brake fluid must be added into the fluid tank when The liquid is close to the lowest level line.
1. Remove the screw, unlock the top cover, metal spacer and leaf spacer.
2. Add the stipulated brake fluid into the fluid tank with sealed container until it reaches the highest fluid level.
3. Fit on the metal spacer and leaf spacer.
4. Screw down the screw.
Other matters that should be checked up
Make sure whether the liquid leaks or not, check whether there is crack or aging for hose and device.
Check whether there is brake pad wear when adding brake fluid again.
Min. scale line
25