SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Instalación página 52

11 Technical Data
Communication
Communication with power plant control, SCADA and re-
mote monitoring
Communication with Sunny Tripower
Communication with genset control units
Type of connections for Ethernet BASE-TX
Type of connections for Ethernet BASE-FX
Multifunctional Switching Inputs
Quantity
Terminal voltage at 0 mA
Maximum voltage drop at 10 mA
Connectable switches
Type of connection
Conductor cross-section
Multifunctional Switching Outputs
Quantity
Terminal voltage
Maximum connectable signal voltage
Maximum signal current
Type of connection
Conductor cross-section
Measurement Inputs
Maximum number of voltage measurement inputs*
Type of the voltage measurement inputs
Measurement range of the voltage measurement be-
tween line conductor and neutral conductor
Measurement range of the voltage measurement be-
tween line conductor and line conductor
Accuracy of the voltage measurement at reference condi-
tions based on the nominal value 480 V
Impedance of the voltage measurement
52 FSC20-IA-xx-20
Modbus/TCP, HTTP, FTP via Ethernet 10 BASE-T, Ethernet
100 BASE-TX
Modbus/TCP via Ethernet 10 BASE-T, Ethernet
100 BASE-TX
Modbus/TCP via Ethernet 10 BASE-T, Ethernet
100 BASE-TX
CAN via Sub-D-9
RJ45
24 V
5 V
Potential-free switches
Spring-cage terminal
1.5 mm² to 2.5 mm²
Potential-free
250 V
5 A
Spring-cage terminal
1.5 mm² to 2.5 mm²
Three-phase
100 V to 277 V
170 V to 480 V
< 1 %
> 2 MΩ per line conductor
SMA Solar Technology AG
LC
10
2
3
Installation Manual