Kärcher MIC 70 Manual Del Usario página 73

Pos. Assembly
11 Battery
12 Exhaust system
13 Parking brake
14 Radiator
15 Tyres
16 Wiping water container
17 Lighting and horn
18 Air-conditioner / heater
19 Warning sticker
20 Dust caps and covers for hy-
draulics
21 Hoses and cable clamps
22 Fuel lines and connections
23 Bowden cables and moving
parts
24 Alternator
25 Electrical cables
26 Bearings / lubrication points Lubricate, see chapter 12.5 Lubrication
* depending on which occurs first
Activity
Check the battery for voltage, and is firm-
ly in place and leak-proof.
Check the electrolyte level and electrolyte
density in the cells (only low-maintenance
battery).
Check the battery poles for oxidation,
brush off if necessary, and lubricate with
terminal grease. Make sure the connec-
tion cables are firmly in place.
Check the condition of the connecting el-
ements and make sure they are firmly in
place.
Visual inspection of the exhaust system
for cracking and leaks.
Check it is working correctly and is cor-
rectly set
Visual inspection of engine coolant,
charge air and hydraulic oil cooler for
damage, firm fit, tightness and contami-
nation; clean if necessary.
Check the coolant level.
Check the mixing ratio water / coolant.
Check the coolant hoses for leaks and
damage.
Check the condition and filling pressure. X
Check the filling level.
Check for correction function.
Check for functionality and leaks. Disin-
fect the evaporator for the air-conditioner.
Check the legibility, replace if necessary.
Check, and replace any missing or dam-
aged ones.
Visual inspection of all hydraulic connec-
tions that they are correctly fitted and
leakproof.
Check for leaks.
Check for freedom of movement.
Clean (not with high-pressure cleaner)
Check for damage.
plan
English
Daily Weekly
X
X
X
X
X
X
X
X
X
X
X
X
X
every 500
hours
or once-a-year*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
73