Brady BSP45 Manual Del Usuario página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
The edge of the cardstock should be flat and in "out of the box" condition. Below are examples of
damaged material, which should be trimmed to remove the damaged portion of the media.
5. Feed the card-stock into the unit, engaging
all tractor pins. If there are sleeves missing,
when started, the machine automatically
advances to the first available sleeve.
To avoid wasting sleeves, ensure that the
mandrel is inserted into the first viable
sleeve. Unused stock rolls have several
blank sleeve windows (as shown in Figure 5
below). The red dotted line in Figure 5
indicates where the cardstock should be
inserted and engaged.
5
2/25/16
6. Close the door on the rear tractor feed.
Note:
If the tractor door is not closed
before closing the die module, it could
stall the motor.
6
Loading Media
BSP45 User's Manual
7

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido