Brady BSP45 Manual Del Usuario página 25

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
Issue/Error Code
4 Red blinks, pause, repeat (Error code 4) (continued)
Fast flashing STOP light
5 Red blinks, pause, repeat (Error code 5)
2/25/16
Problem
Material is installed upside
down
Temperature change
Excess light
BP sensor not working
Troubleshooting 15
Solution
• Make sure the material
is installed with the blue
line facing down. See
"Loading Media" on
page 6 for proper
installation.
• Open and close the
access door to reset
error.
After a period of 2 minutes the
Stop button will be solid red.
• Open and close the
cover door
OR
• Press and depress the
E-Stop to resume normal
operation.
The machine will lock for 2
minutes then return to normal
operation.
Note:
Do NOT turn off
the machine as it will
reset the 2 minute
timer.
Allow one hour for machine to
acclimate to ambient
temperature.
Remove bright lights that are
shining on or in the machine.
Contact Brady technical
support
BSP45 User's Manual

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido