Bowa ErgoLAP Manual Del Usuario página 28

3. Application
What you should know when connecting the bipolar instrument
3.1. Preparation
HF cable
Active electrodes
HF unit
8
 Avoid monitor display interference:
•
Do not run HF cable directly parallel to camera cables.
•
Do not lay HF cable in loops.
•
Never place HF cable onto the skin of the patient.
 Connect instrument for coagulation and switch on
electrosurgical generator.
 Grasp HF cable only by the connector when plugging in and
unplugging.
WARNING
Risk of unintended burns.
 Never use worn out or faulty active
 Dispose of worn out or faulty active
Pay attention to the electrosurgical generator
instruction manual and to general information
on electrosurgical procedures.
 Technical data, page 7
WARNING
Improper use of HF current can cause endogenous and
exogenous burns as well as explosions.
 Carry out electrosurgical procedures only with
insufflation of incombustible gases (CO
electrodes.
electrodes - never repair!
).
2
MN030-667-S2 EN