Disassembly And Disposal; Safety Information For Disassembly And Disposal; Disassembly; Disposal - RK Rose+Krieger Multilift I Manual De Montaje

7

Disassembly and disposal

7.1 Safety information for disassembly and disposal

Improper disassembly

7.2 Disassembly

7.3 Disposal

20.02.2019
WARNING!
Risk of injury in the event of improper disas-
sembly!
Sharp-edged components, tips and corners on the
lifting column or the required tools can cause injuries.
– Ensure that there is sufficient space before starting
work.
– Handle exposed components with sharp edges
carefully.
– Ensure that the work area is clean and tidy at all
times! Components and tools lying around or on
top of one another are sources of accidents.
– Disassemble components properly. Observe the
components' sometimes high net weight. If neces-
sary, use lifting gear.
– Secure components so that they do not fall down
or topple over.
– Consult with the manufacturer in the event of
uncertainties.
Before starting disassembly:
n Physically disconnect the lifting column from the electrical
power supply.
n Dispose of operating materials in an environmentally friendly
manner.
Then clean the modules and components properly and disas-
semble them, adhering to the applicable local occupational health
and safety and environmental protection regulations.
Disposal of the lifting column in Germany is governed
by Elektro-G (RoHS); in the European area EU Direc-
tive 2012/19/EC or the respective national legislation
applies.
Lifting column Multilift I/Multilift II
Disassembly and disposal
Disposal
111