Assembly; Safety Information For Assembly - RK Rose+Krieger Multilift I Manual De Montaje

5

Assembly

5.1 Safety information for assembly

Improper assembly
Falling components
20.02.2019
WARNING!
Risk of injury due to improper assembly!
Improper installation and assembly can lead to severe
injuries and substantial property damage.
– Before starting work, pull the mains plug and
ensure that there is sufficient space for assembly.
– Handle exposed components with sharp edges
carefully.
– Ensure that the assembly site is kept clean and
tidy at all times! Components and tools lying
around or on top of one another are sources of
accidents.
– Assemble components properly. Adhere to the
required screw tightening torques.
– Do not drill any additional holes in the lifting
column.
– Secure components so that they do not fall down
or topple over.
CAUTION!
Risk of crushing and impacts as a result of the
profiles falling or coming loose (outer, middle,
inner profile)!
If subjected to a tensile load, the profiles of the lifting
columns may become detached from one another, and
cause injuries.
– Secure the profiles to prevent them from coming
loose, e.g. using additional bars or chains.
– Never install or operate the lifting column above
the head.
– Never expose the lifting column to impulse forces
and/or impact stresses.
Lifting column Multilift I/Multilift II
Assembly
Safety information for assembly
99