Pushing/Towing The Device (Without Engaging Self-Propulsion); General Notes En - Kärcher B 300 RI D Manual De Instrucciones

5.2

Pushing/towing the device (without engaging self-propulsion)

5.3 General notes
The freewheel (bypass) of the hydraulic pump must first be
opened before the device can be pushed/towed.
DANGER
Risk of injury!
Secure the device against rolling away prior to opening

the freewheel.
Note
The travel drive is inoperable.
Braking effect exists no more.
CAUTION
Risk of damage to the hydrostatic axle drive!
Do not move the device for long distances without en-

gaging self-propulsion; a speed of 5 km/h should not be
exceeded.
1 Hydraulic pump
2 Screw for freewheeling (bypass)
Open engine cover.

Open freewheel (bypass)
Open the screw for the freewheel by at least 1/2 revo-

lution (anti-clockwise).
Close freewheel (bypass)
After moving/towing the device, turn the screw for the

freewheel back until it stops (clockwise).
1 Towing eye
To tow the vehicle, attach the towing eye to the device

at the front.
Read the operating instructions of the engine manufac-

turer before start-up and follow the safety instructions
carefully.
Park the machine on an even surface.

Remove ignition key.

Lock parking brake.

10
-
EN 51