Weinmann MEDUMAT Easy CPR Descripción Del Aparato E Instrucciones página 20

EN
20
Installation
2. Slide the pressure gauge tube onto connection.
3. Slide the ventilation hose onto connection.
C P R
4. Connect the patient valve to the other end of the
5. Connect the MEDUtrigger to the mask/tube con-
6. Place the hose casing around the ventilation
7. Fasten the hose casing with the hook-and-loop
8. If a mask is being used for ventilation, attach the
connecting or disconnecting it. The connection
socket may be damaged if the MEDUtrigger con-
nector is rotated.
Make sure that this does not cause any kinks in
the pressure gauge tube already connected. If
necessary, turn the ventilation tube in the appro-
priate direction while pushing it on.
Always grasp the ventilation hose and
pressure gauge tube by their end only (po-
sition of arrow in adjacent drawing), oth-
erwise they may be damaged or split.
ventilation hose and pressure gauge tube.
nection.
tube and the connection line for the MEDUtrig-
ger.
tape and close it with the zip fastener.
mask connection to the patient valve (identical
with tube connection),
or