C P R
6.4 MEDUtrigger
6.5 Masks
6.6 Fittings
EN
44
Hygiene preparation
1. Take the ventilation hose and the pressure
gauge hose off bothconnection ports.
Caution!
Always grasp the hoses
shown in the drawing, otherwise the hoses may
be damaged or torn off.
2. Pull the MEDUtrigger plug down and out with-
out turning or levering it (see diagram).
3. Perform the hygienic preparation as described in
section 6.7.
4. For reassembling, see "4.2 Ventilation hose and
MEDUtrigger" on page 19.
Perform the hygienic preparation of the
MEDUtrigger as described in section 6.7.
Perform the hygienic preparation of the masks as
described in section 6.7.
For external cleaning of fittings (e.g. pressure reduc-
er, valve), use only a clean cloth. The cloth can be dry
or moistened with clean water.
at the end
, as