Selecting The Ventilation Settings - Weinmann MEDUMAT Easy CPR Descripción Del Aparato E Instrucciones

5.2 Selecting the ventilation settings

500
10
300
12
15
20
150
25
100
65
Freq.(c/min
60
V
50
40
30 CP R
20
10
0
EN
24
Using the ventilator
We recommend selecting the ventilation settings be-
fore switching on, to prevent unnecessary waste of
oxygen.
Respiratory frequency and tidal volume
1. Set the minute volume (tidal volume) to the re-
600
800
950
Distribution of ventilation settings
-1 )
(ml)
t
Age (years)
Body weight (kg)
Respiratory
frequency (min
Tidal volume (ml)
If audio response is enabled, you will hear the
message "Device malfunction! Administer alter-
native ventilation".
After the self-test, the ventilator repeatedly
checks the oxygen cylinder pressure until ade-
quate pressure is detected. Otherwise an alarm is
sounded.
The MEDUMAT Easy CPR will then start to func-
tion with the selected ventilation settings.
spiratory frequency with the ventilation settings
regulator knob.
Colour code: yellow orange
1 - 5
10-25 20-45 45 75
25-15 15-12 12 10
-1
)
65-150
The figures shown in the table are only recom-
mendations. Different settings may be required
in cases of pulmonary damage or for special indi-
cations.
brown
5 - 16 16+
90 120 140
10
150-
300 500 600 800 950
300
10 10