Start-Up. Operation And Adjustment Controls - gala gar GALAXY 3000 GE MV VRD Manual Técnico De Instrucciones

3.

START-UP. OPERATION AND ADJUSTMENT CONTROLS.

We will develop the recommended configuration for each welding process in the next chapter, as well as the
management of the control panel.
3.1. OPERATION CONTROLS.
3.1.1. CONTROL PANEL.
Brand Symbol
A
STANDARD/VRD
B VRD (S)
C 400V 3Ph
230V 3Ph
D
230V 1Ph
EN
F
(A)
G
H
ON
I
J
V
K
A
L
HOLD
M
WELD
N
GALAXY 3000 GE MV VRD
Description of use.
Standard selector mode - VRD Safety Mode
Indicator LED - Safety voltage presence.
Indicator LED - Connection to three-phase mains 380-400-415V.
Indicator LED - Connection to three-phase mains 220-230-240V.
Indicator LED - Connection to single-phase mains 220-230-240V.
Indicator LED - Remote control connection
Potentiometer - Current adjustment (Dial function on L display)
Indicator LED - Thermal shutdown
Amber coloured luminous diode.
overheating
Indicator LED - Mains connection ON
Welding process selector:
ELECTRODE MODE. In this mode, the HOT START, ARC FORCE, and ANTI-STICKING
functions will be available. Electrode welding is easier and more effective using these.
Welding process selector
TIG MODE. This work mode is ideal for
It allows striking while establishing low currents when the electrode touches the piece
(LIFT ARC), thus avoiding contamination of the piece and the electrode.
The electrode anti-sticking system, as well as arc force and hot start are nullified.
Indicator display - Welding voltage
Indicator display - Current voltage (Dial in setting process)
Indicator LED - Memorization of display values subsequent to welding.
Indicator LED - Equipment in welding mode.
Thermal disconnecting indicator by
.
TIG welding
EN
23