Apex Pro-care Auto Manual Del Usuario página 12

Pro-care Auto / English
4.3 Emergency CPR Operations
NOTE: When there is an emergency to perform CPR on the patient, quickly turn the CPR knob to release
air from mattress. The CPR knob is located at the head-end, right-hand-side of the mattress.
The quick connector on the pump unit can be disconnected for even faster deflation.
NOTE: After CPR, re-activate auto adjustment to ensure proper pressure setting. Please make sure
the CPR valve and quick connector are correctly connected, and always performs hand-check
after Auto-Adjust or Tuning process.
4.4 Transportation
When there is a power outage or a need of transporting the patient, the quick connector can be capped as
shown to slow down the air leakage. Depending on the setting and mattress height, the mattress can
remain inflated for a period of time.
WARNING: If there is a bottom-out issue, please remove the patient from deflating mattress to
another suitable surface.
10