ChefsChoice Professional Diamond Hone 2000 Manual De Instrucciones página 3

Congratulations on your selection of
the Chef'sChoice
Sharpener Model 2000!
You will find this method of sharpening puts an exceptionally sharp and durable edge on all
of your knives. It is backed by EdgeCraft—World Leader in Cutting Edge Technology
The Chef'sChoice
®
incorporates advanced diamond abrasive and honing technology to produce the sharp-
est and most durable edges of any sharpener available today. With it you can develop a
shaving-sharp edge on all your knives. Once your knives have been sharpened on the
Model 2000, resharpening takes less than 1 minute.
Consequently, if the Model 2000 is conveniently located in your work area, you can
resharpen so rapidly that you need not rely on the sharpening steel to tune up the edge.
UNPACKING AND PREPARING FOR OPERATION
The Model 2000 has a motor-drive section and a detachable Sharpening Module that is
packed and shipped disassembled (See Figure 1).
To assemble the Model 2000, insert the Sharpening Module into the guide rails of the
motor section, (Figure 2) and slide the module toward the motor housing until it locks in
place. If the sections do not snap together easily & quickly, follow the instructions in the
"Inserting" section, (Page 8) of this manual.
Motor-drive Section
On/Off Switch
Sharpening Module
Commercial Diamond Hone
Professional Knife
®
Knife Sharpener Model 2000
®
Release Button
3
.
®
Figure 1. Model 2000
sharpener - disassembled.