Assembly Instructions - Kobalt SGY-AIR86TZ Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. This spray gun is rugged in construction, and is
built to yield exceptional value. The life of this
product and the efficiency of its operation depend
upon the knowledge of its construction, usage
and maintenance. (See Figure1. Not all
accessories shown are included)
2. Take out spray gun and put filter on spray gun.
(See Figure 2)
3. Put on paint cup, and securely tighten by hand
making sure there is a tight secure fit.
(See Figure 3)
4. Put on air pressure regulator at air intake
connector and tighten by hand.
1
2
3
4
6
Gravity Feed Cup
Fluid Adjustment Knob
Air Inlet
Atomization
Oil and
Pressure Gauge
Water
Extractor
Air Hose