Safety Devices; Fields Of Measurement And Precision; Overall Dimensions - Ravaglioli RAV TD4400 Serie Instrucciones Para El Uso

RAVAGLIOLI S.p.A.

3.1 Safety devices

The wheel aligner features a safety device (master switch) on the rear of the machine, see
chap. 3 on page 4. The master switch disconnects power to the machine when positioned
on "O".
Caution: the measuring heads are powered by the lift unit. These can be switched off and on by
means of the control on the unit itself (see lift manual).

3.2 Fields of measurement and precision

Axle
Toe-in
Semitoe-in
Front
Wheel camber
Caster angle
King-Pin
Toe-in
Semitoe-in
Rear
Wheel camber
Thrust Angle
Difference of wheelbase

3.3 Overall dimensions

RAVAGLIOLI S.p.A. – 40044 Pontecchio Marconi (BO) Via I Maggio, 3
Measurement
Tel. (+39) 051/ 67.81.511 – Fax (+39) 051/ 84.64.67
e-mail: rav@ravaglioli.com
RAV TD4400
Field of
Precision
measurement
± 2' ± 3°
± 1' ± 1°30'
± 2' ± 3°
± 5' ± 10°
± 5' ± 10°
± 2' ± 3°
± 1' ± 1°30'
± 2' ± 3°
± 2' ± 3°
± 2 mm ± 200 mm
Figure 1
/http www.ravaglioli.com
OPERATOR'S MANUAL
Code M0150 - rev.1.0
(01/2008)
Total field of
measurement
± 12°
± 6°
± 6°
± 18°
± 18°
± 12°
± 6°
± 6°
± 6°
1800mm ÷ 4400mm
Page 5/ 15