Batteries - SURE petcare Felaqua Connect iCWS Serie Manual Del Producto

Batteries

Always use 4 x good quality 1.5V alkaline C cell batteries. This will ensure the best
performance of your Felaqua Connect. This product is NOT designed for use with
rechargeable batteries. To insert or change the batteries please follow the steps below:
There is an LED to the right of the reservoir on Felaqua Connect and if the batteries
are low, or if there's a problem with how they've been inserted, this light will flash
red every five seconds.
1
Turn the product upside down
to access the battery compartment.
3
Replace the battery cover.
Turn the product the right way up and
replace the bowl, then the reservoir.
Once you have added your pet's microchip ID into Felaqua Connect it will
be permanently stored in its memory, even when you change the batteries.
See page 14 for more information on adding pets.
2
Remove the battery cover and insert
the batteries. Ensure the +/- symbols
match the symbols on the product itself.
4
To attach the reservoir and bowl,
first tighten the reservoir lid so
the grooves are aligned, then place
the bowl onto the product and slot
the reservoir over it.
EN
10