Filling & Replacing Water - SURE petcare Felaqua Connect iCWS Serie Manual Del Producto

Filling & replacing water
It is important to change your pet's water on a daily basis, not only to ensure your pet stays
happy and healthy, but also to keep your Felaqua Connect clean and in working order.
Changing the water regularly can also help it maintain the optimal water presentation.
Please only use tap water to fill your Felaqua Connect.
6
Water should flow into the bowl.
If water continues to bubble for
more than 10 seconds, remove
the reservoir and reattach the lid.
5
Replace the bowl then
the reservoir, making sure the
slots fit over the bowl correctly.
13
1
Remove the reservoir
by pulling it upwards
then lift off the bowl.
4
Empty and refill the reservoir
with water and reattach the
lid, making sure it is tight and
the slots are aligned correctly.
2
Use the tab at the front of
the bowl to lift and carry it.
Tilt the bowl backwards to
better contain the water
and avoid spillage.
3
Turn the reservoir over
and unscrew the lid.