Mes - Festo 404-1 System Instrucciones De Utilizacion

9.8 MES

The MES can be used to plan products and work orders, which are written to an RFID tag using RFID
technology.
In the first station, the order number (ONo) and order position (OPos) are written onto the RFID tag located
in the workpieces. The ONo and OPos are then read in the following stations. After they are read, a query
quoting the ONo and OPos is sent to the central MES system. The MES system then sends parameters for
the work steps to the station that sent the query.
A description of the MES software can be found in the Festo Didactic InfoPortal.
www.ip.festo-didactic.com
The software is normally required for all parts of the MPS system 404-1.
© Festo Didactic 8150266
404-1 System, Distributing Pro-Joining-Measuring Pro-Sorting Inline – Operating instructions
43