The Sorting Inline Station - Festo 404-1 System Instrucciones De Utilizacion

Distribución pro-unión-medición pro-clasificación en línea
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

404-1 System, Distributing Pro-Joining-Measuring Pro-Sorting Inline – Operating instructions

9.5 The Sorting Inline station

The station has been expanded for the MPS System 404-1 to include the height-adjustable RFID module.
The RFID tag in the workpiece is read by the RFID read/write head and, depending on the results, the
workpiece is ejected.
It is also possible for the Robotino with electric gripper to retrieve the workpiece at the end of the conveyor
belt. The Handshake module is required for communication between the Robotino and the MPS station.
The function of the Sorting Inline station is to:
Sort workpieces according to their characteristics
Sort workpieces according to RFID tag content
40
For additional information, please see the following document:
Sorting Inline station, document no. 8129442
You can find this document on the internet at the following address:
www.ip.festo-didactic.com
Sorting is a sub-concept of the "change quantity" handling
function. The conveyor is equipped with branches for sorting the
workpieces. Various deflectors are set, depending on the
workpiece.
The workpieces must travel individually so as not to interfere
with the switching operations of the deflectors.
Workpieces are sorted in the Sorting Inline station according to
the content of the RFID tag. If negative results are obtained
during quality inspection, the workpieces are sorted out to a
scrap chute.
© Festo Didactic 8150266

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8150260

Tabla de contenido