Progress PBN 1110 Manual De Instrucciones página 14

14 progress
in such a way that they cannot be undone
without tools.
These also include the fixing of any end walls
at the beginning or end of a line of builtin
units.
The shock protection must in any case be
ensured by the building in of the appliance.
The appliance can be placed with its back or
a side wall against higher kitchen units, ap-
pliances or walls. However, only other appli-
ances or units of the same height as the ap-
pliance can be placed against the other side
wall.
Oven dimensions (see figure)
50
Instructions for building in
For ensuring a trouble free use of the installed
appliance, the unit or the column where the
appliance is to be installed should have ap-
propriate dimensions.
Securing the oven to the cabinet
1. Open the oven door.
2. Fix the oven into the unit using the four
distance brackets (see figure - A ).
These fit exactly into the holes in the
frame. Then tighten the four wood screws
supplied (see figure B ).