Cleaning; Clean The Cabinet - Laerdal Serres Guia Del Usuario

Cleaning

Parts to be cleaned or replaced regularly:
Serres Canister
Serres Vacuum Connector
The disposable parts must be replaced after each use.
Clean the Serres canister if needed according to manufacturer's instructions for use.
Clean the Serres Vacuum Connector by wiping with a damp cloth or a sponge. Do not
autoclave or attempt to disassemble. The Serres Vacuum Connector should be replaced
regularly.

Clean the Cabinet

Use a minimum amount of liquid to prevent any electrical shock hazard. Do not immerse
the LSU or allow it to stand in water or other liquids. This can damage the device, and
cause electrical shock resulting in injury to persons.
Use a cloth or sponge that is dampened with a mild detergent (hand dishwashing liquid
or similar) to clean the external surfaces of the LSU.
Use a detergent that is compatible with the materials listed in the Material Chart, and
follow the detergent manufacturer´s instructions.
Use a cloth or sponge dampened with water and wipe the surfaces again.
Dry the surfaces using a clean cloth or a paper towel.
12