Technical Data - geberit ECO 201 Instrucciones De Servicio

Technical data

Commissioning
Operating instructions ECO 201
Nominal voltage
Mains frequency
Power input
Protection class
Protection degree
Cable length
Nominal force
Net weight
Noise level at user's ear
Vibration value
Temperature range during operation
Inserting the pressing jaw/adapter for pressing collar/
MapressMAM jaw adapter
Prerequisites
Pressing device is switched off.
WARNING
Danger of crushing by exposed parts
` Do not operate the pressing tool without pressing jaws
` Keep your fingers away from the area of the roller if
there is no pressing jaw inserted
Pressing is only possible once the locking pin has been
pressed in as far as the stop.
1 Pull out the locking pin
See specification plate
See specification plate
400 W
II
IP 20
5 m
32 kN
4.0 kg
77 dB(A)
≤ 2.5
m/s²
-20 °C - +60 °C
EN
17