Using The Stand Mixer - Duronic SM104 Manual De Instrucciones

15. Do not plug in or switch on the mixer until the bowl is in place on the base.
Do not remove the bowl from the base while the mixer is switched on.
16. The bowl and attachments are not dishwasher safe – hand wash only.
17. Remove the flat beater, whisk or dough hook from the stand mixer before
washing.
18. Do not use an extension lead or plug adapter with this
appliance.
1. Place the stand mixer on a dry, fat and even surface positioned close to a
plug socket.
2. Lift the arm by pressing the lift button. The arm will now move upwards.
3. Place the mixing bowl onto its mount and turn the bowl until it locks in place.
4. Attach the mixing tool you require by inserting it onto the beater shaft and lock
it in place.
5. Pour your ingredients into the bowl. Be careful to not overfill the bowl.
6. Lower the arm by pressing the lift button and at the same time push the arm
downwards until it clicks into place.
7. Plug in the power cable.
8. Switch on the mixer by using the speed dial, selecting a speed between 1-6
depending on the mixture you are making.

Using the Stand Mixer

8