Duronic SM104 Manual De Instrucciones página 86

1. Do not plug in or switch on the mixer until the bowl is in place on the base.
Do not remove the bowl from the base while the mixer is switched on.
2. The bowl and attachments are not dishwasher safe – hand wash only.
3. Remove the flat beater, whisk or dough hook from the stand mixer before
washing.
4. Do not use an extension lead or plug adapter with this appliance.
WARNING:
Do not run the blender for more than 60 seconds continuously. If
the blender is run for too long, the motor can overheat and it will
automatically shut down. If this happens, empty the and allow the
appliance to cool down for 45 minutes before using it again.
1. Place the stand mixer on a dry, flat and even surface positioned close to a
plug socket.
2. Lift the arm by pressing the lift button. The arm will now move upwards.
3. Place the mixing bowl onto its mount and turn the bowl until it locks in
place.
4. Attach the mixing tool you require by inserting it onto the beater shaft and
lock it in place.
5. Pour your ingredients into the bowl. Be careful to not overfill the bowl.
6. Lower the arm by pressing the lift button and at the same time push the
arm downwards until it clicks into place.
7. Plug in the power cable.
8. Switch on the mixer by using the speed dial, selecting a speed between
Using the Stand Mixer
86