Promise Technology VTRAK S3000 Guia De Inicio Rapido página 50

VTrak S3000 Quick Start Guide
When the controller shuts down, your WebPAM PROe connection is lost.
7. Wait about two minutes.
8. In your browser, click Logout in the Header, then log into WebPAM PROe
once again.
If you cannot log in, wait 30 seconds and try again.
Making Controller Settings
Your subsystem has two controllers. Settings you make to one controller are
automatically applied to the other controller.
To make the recommended controller settings:
1. Click the Subsystem
2. Click the Controllers
3. Click the Controller
4. Click the Settings tab in Management View.
5. Make the following settings:
• UNcheck the Enable LUN Affinity box to disable.
• UNcheck the Enable SMART Log box to disable.
• Check the Adaptive Writeback Cache box to enable.
• UNcheck the Host Cache Flushing box to disable.
• UNcheck the Forced Read Ahead [cache] box to disable.
Leave the other settings at their default values.
6. Click the Submit button.
The changes take effect immediately.
Making Background Activity Settings
To make the recommended background activity settings:
1. Click the Subsystem
2. Click the Controllers
3. Click the Controller
4. From the dropdown menu on the Background Activities tab, choose
Settings.
5. Check the Enable Auto Rebuild box to enable.
Leave the other settings at their default values.
6. Click the Submit button.
The changes take effect immediately.
icon in Tree View.
icon.
icon.
icon in Tree View.
icon.
icon.
50