Promise Technology VTRAK S3000 Guia De Inicio Rapido página 61

The Select a WWPN Port Mapping Type dialog box opens.
3. In the dialog box, choose the appropriate mapping type for your system.
• One to One – You do not use multipathing.
All to All – You use multipathing, such as PerfectPath on Windows.
•
Click the Next button to continue.
The Select Initiator dialog box opens.
4. In the dialog box, click the Initiator WWPN you want to use.
You can only choose one. Click the Next button to continue.
The Select Target dialog box opens.
5. In the dialog box, click the Target WWPN you want to use.
You can only choose one. Click the Next button to continue.
The Select LUN numbers for the resources dialog box opens.
6. In the dialog box, choose a Starting LUN from the menu.
The default LUN number is 0 (zero).
Click the Next button to continue.
The Assign SAN Resource(s) to the SAN Client dialog box opens.
7. In the dialog box, verify the information and click the Finish button.
A success message displays.
8. In the message, click the OK button.
The new SAN resource
which you assigned it.
Assigning Storage to an iSCSI Client
To assign storage to an iSCSI client:
1. On the client system, in the Microsoft iSCSI Initiator, add the IP address of
the target subsystem.
2. In the Management Console, in the Tree under SAN Clients
an iSCSI client
Click the Next button to continue.
The Create iSCSI Target dialog box opens.
If you checked Is Clustered when you created the SAN client, be
careful that you do NOT assign the same LUN to different SAN
resources.
, and choose Create Target from popup menu.
Important
appears in the Tree under the SAN client
61
Task 12: Setting-up Basic Storage
to
, right-click