Tabla De Contenido - Promise Technology VTRAK S3000 Guia De Inicio Rapido

VTrak S3000 Task List
• Task 1: Unpacking the Boxes (below)
• Task 2: Mounting the Appliance in a Rack (page 5)
• Task 3: Configuring the VTrak Appliance (page 9)
• Task 4: Mounting the Subsystem in a Rack (page 24)
• Task 5: Installing Disk Drives in the Subsystem (page 27)
• Task 6: Making Data Connections (page 29)
• Task 7: Making Management Connections (page 35)
• Task 8: Setting-up Serial Cable Connections (page 38)
• Task 9: Powering-on the Subsystem (page 39)
• Task 10: Setting-up the Subsystem (page 41)
• Task 11: Configuring Storage on the Subsystem (page 47)
• Task 12: Setting-up Basic Storage (page 55)
• Task 13: Setting-up High Availability (page 63)
• Contacting Technical Support (page 69)
Thank you for your purchase of the VTrak S3000 storage solution. This Quick
Start Guide is designed to help you unpack, install, connect, configure, and run
your VTrak S3000 system.
If you are adding VTrak RAID subsystems or JBOD enclosures to your VTrak
S3000 system, follow the Task List in this document. The Task Lists in other
Quick Start Guides do not cover VTrak S3000.
For complete information about your VTrak S3000 appliance, see the VTrak
S3000 User Manual on the software DVD.
Please see the software DVD for a complete set of user documents.
Task 1: Unpacking the Box
The VTrak S3000 appliance box contains the following items:
• VTrak appliance
• Bezel
• Left and right mounting rails for the appliance
• 1.5 m (4.9 ft) Power cords, 2 each
• Accessory box
• Printed software license key
• DVD with software install files and user documentation
3
Task 1: Unpacking the Box