Promise Technology VTRAK S3000 Guia De Inicio Rapido página 57

Batch
If you chose Batch, the Specify Batch Mode Information dialog box opens.
• Accept the default a SAN Resource Prefix or enter a new one in the field
provided.
• Enter a Resource Size in MB if the field provided.
• Enter the Starting Number and the Number of (SAN) Resources in the
fields provided.
• From the list, click the Device you want to use and click the Next button.
The SAN Resource Name dialog box opens.
8. In the dialog box, enter a name for the SAN resource in the field provided
and click the Next button.
The Create the SAN Resource dialog box opens.
9. In the dialog box, verify the information and click the Finish button.
10. In the success message, click
• Yes – Assign SAN clients now.
• No – Assign SAN clients later.
Enabling a FC Target Mode
You must enable FC target mode on the appliance (server) before you can create
an FC SAN client.
To enable FC target mode:
1. In the Tree, right-click the VTrak server
Enable FC Target Mode from the popup menu.
2. In the Tree, go to Server > Physical Resources > Physical Adapters.
3. Right-click the Fibre Channel
connection and choose Enable FC Target Mode from the popup menu.
Creating a FC SAN Client
To create a Fibre Channel SAN client:
1. In the Tree, right-click SAN Clients
menu.
The Add Client wizard opens.
Click the Next button to continue.
The Select Client Protocols dialog box opens.
2. In the dialog box, check the Fibre Channel protocol used to connect your
clients' PCs to the VTrak appliance.
Task 12: Setting-up Basic Storage
icon and choose Options >
adapter to be used for the UPstream
icon and choose Add from the popup
57