Task 2: Mounting The Appliance In A Rack - Promise Technology VTRAK S3000 Guia De Inicio Rapido

Task 2: Mounting the Appliance in a Rack

Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections:
• A pair of two-piece chassis rails that attach to the chassis
• A pair of two-piece rack rails that attach to the rack
Figure 1. Appliance rack mount components
Inner Chassis Rails
The chassis rails come in two sections:
• Chassis rails – Attached to the chassis at the factory
• Chassis rail extensions – You attach them to the chassis rails
Installing the Chassis Rail Extensions
1. Place the chassis rail extensions on the side of the chassis aligning the
hooks on the chassis with the holes on the rail extensions.
The inner rail extension faces "outward" the same as the inner rail.
2. Slide the rail extension toward the front of the chassis.
3. Secure the chassis with two attaching screws as shown in the diagram.
Use the screws supplied with the rack mount kit. See page 6, Figure 2.
4. Repeat steps 1 through 3 for the other chassis rail extension.
Task 2: Mounting the Appliance in a Rack
Rack rail extensions
Rack rails
Chassis rail
extensions
Chassis rails
(both sides)
5