Promise Technology VTRAK S3000 Guia De Inicio Rapido página 67

You must choose secondary standby WWPNs for:
• VTrak S3000-01 adapter 1
• VTrak S3000-01 adapter 2
• VTrak S3000-02 adapter 1
• VTrak S3000-02 adapter 2
Choose the secondary standby WWPN for the first adapter and click the
Next button.
Repeat the action until all four secondary standby WWPNs are chosen.
Click the Next button to continue.
The Configure Power Control Option dialog box for the first VTrak appliance
opens.
10. In the dialog box, choose IPMI from the dropdown menu and click the Next
button.
The Configure Power Control Option dialog box for the second VTrak
appliance opens.
11. In the dialog box, choose IPMI from the dropdown menu and click the Next
button.
The Confirm the Failover Configuration dialog box opens.
12. In the dialog box, check your settings and click the Finish button to
configure your failover.
Saving the Server Configuration
There are two methods to save VTrak appliance (server) configuration:
• Manual – Saves the *.config file to a place you choose
• Automatic – Saves the *.config file to the Repository
To save the server configuration manually:
1. In the Tree, click the VTrak server
2. From the File menu, choose Save Configuration.
3. In the Save dialog box, navigate to the place where you want to save the
configuration file and click the Save button.
The *.config file is saved as you directed.
To enable a Configuration Repository in which to save the server configuration
automatically:
1. In the Tree, right-click the VTrak server
Enable Repository.
The Enable Configuration Repository wizard launches.
Task 13: Setting-up High Availability
icon to select it.
icon and choose Options >
67