Promise Technology VTRAK S3000 Guia De Inicio Rapido página 54

VTrak S3000 Quick Start Guide
Creating Spare Drives
Create two global spare drives in the RAID subsystem.
To create a spare drive:
1. Click the Subsystem
2. Click the Spare Drives
3. Click the Create tab in Management View.
4. Choose the Global spare type.
5. Check the Revertible box.
6. In the Physical drives field, highlight the physical drive you want to assign as
a spare drive in the Available list and press the >> button to move the drive
to the Selected list.
You can also double-click drives to move them.
7. Click the Update button.
Your choices are displayed under New Hot Spare Drives.
8. Click the Submit button.
Logging out of WebPAM PROe
There are two ways to log out of WebPAM PROe:
• Close your browser window
• Click Logout on the WebPAM PROe banner
Figure 20.Clicking "Logout" on the WebPAM PROe banner
Clicking Logout brings you back to the Login Screen. See page 48.
After logging out, you must enter your user name and password in order to log in
again.
• You must partition and format your logical drives to work with
your operating system.
• Make the two DATA logical drives Service-Enabled.
For more information, see Chapter 5 of the VTrak S3000 User
Manual on the software DVD.
icon in Tree View.
icon.
Important
54