Promise Technology VTRAK S3000 Guia De Inicio Rapido página 58

VTrak S3000 Quick Start Guide
Click the Next button to continue.
Either the Set Client Fibre Channel Properties or the Set Client iSCSI
Properties dialog box opens.
3. In the dialog box, click Add button.
The Add Initiator WWPN dialog box opens.
4. In the dialog box, enter your initiator WWPN and click the OK button to
continue.
The Set Client Properties dialog box opens with the initiator WWPN in the
list.
5. The next step depends on your choice of action.
• To add another WWPN, click the Add button.
• To choose the WWPNs you want to use, check the box beside each
one.
• To continue, click the Next button.
The Enter the Generic Client Name dialog box opens.
6. In the dialog box,
• Enter a client name into the field provided.
• Choose the Client Type from the dropdown menu.
• Check Is Clustered box if you plan to assign the same storage to
multiple clients.
• If the Client PC is running, click the Find button to discover it. If the PC
is found, its IP address is input automatically.
• If the Client PC is offline, enter the IP address manually.
Click the Next button to continue.
The Fibre Channel Options dialog box opens.
7. In the dialog box, click the Next button to continue.
VTrak does not support VSA.
The Select Persistent Reservation Option dialog box opens.
8. In the dialog box, uncheck the box to disable the Persistent Reservation
feature, and click the Next button.
Persistent Reservation applies to clustering applications.
The Add the Client dialog box appears.
9. In the dialog box, verify the information and click the Finish button.
The new client appears in the Tree under SAN Clients
58
.