Powering The Device; Connecting Additional Hardware; Information On The Balance; Keyboard - Buttons Function - RADWAG R Serie Manual Del Usuario

3.6. POWERING THE DEVICE

Balance can be connected to the mains only with a power adapter that comes standard with
the particular model. Nominal power supply of the power adapter (specified on the power
adapter data plate) should be compatible to the power from the mains.
Plug the balance to the mains – connect the power adapter to the socket, next connect its connector
to port located at the back of the balance housing.
Test of the display unit takes place right after connecting the balance to the power, all the elements
and pictograms are backlit for a short time. Next, the name and the program number appears, the
indication gets to ZERO (displayed reading unit depends on the balance). During the balance start,
the test of an internal mass adjustment mechanism occurs (single location and elevation of the
internal mass adjustment).
If the indication is different than zero, please press
CAUTION!
If the balance is "verified", automatic adjustment occurs right after switching the balance on.

3.7. CONNECTING ADDITIONAL HARDWARE

Use only accessories and peripheral equipment recommended by the manufacturer. The balance
must be disconnected from the mains before connecting or disconnecting any peripherals (printer,
PC computer, computer keyboard). On connecting the peripherals, plug the balance to the mains.

3.8. INFORMATION ON THE BALANCE

<INFO> menu provides information on the balance: balance type, software version, internal
temperature of the balance. The parameters are strictly informative.
<SETUP PRNT.> parameter has been designed to enable sending balance settings to printer (all
parameters).
4. KEYBOARD – BUTTONS FUNCTION
Press to switch the balance ON/OFF. If switched off, balance
components other than the display are powered, and balance is in
stand-by mode.
F9 button of the computer keyboard.
Press to access data stored in a database: user, product, tare.
F10 button of the computer keyboard.
Press to enter directly the active working mode settings.
F11 button of the computer keyboard.
button.
- 16 -