Working Modes - RADWAG R Serie Manual Del Usuario

More data can be recorded in the same file. The balance software will add the data to the file that has
already been created on a flash drive. Consequently, you can continue saving measurements in the
same file once created.
CAUTION:
USB flash drive shall feature <FAT file system>.

11. WORKING MODES

−
Weighings
−
Parts Counting
−
Checkweighing
−
Dosing
−
Deviations % in reference to mass of the standard
−
Animal Weighing
−
Density Determination of Solids
−
Density Determination of Liquids
−
Statistics
−
Totalising
−
Peak Hold
−
Pipettes Calibration
In order to run a particular mode press
Once the button
or - press to select working mode
has been pressed, the name of the first available function is shown.
button, and select the mode from the list.
- 40 -