RADWAG R Serie Manual Del Usuario página 87

Set max checkweighing threshold
Format: UH_XXXXX CR LF, where: _ - space, XXXXX - mass format
Response options:
UH_OK CR LF - command carried out
ES CR LF - command not recognised (mass format incorrect)
Give value of min checkweighing threshold
Format: ODH CR LF
Response: DH_MASA CR LF - command carried out
Response format:
1 2 3
D H Space
Mass - 9 characters with right justification
Unit - 3 characters with left justification
Give value of max checkweighing threshold
Format: OUH CR LF
Response: UH_MASA CR LF - command carried out
Response format:
1 2 3
U H Space
Mass - 9 characters with right justification
Unit - 3 characters with left justification
Set mass value of a single item (only for PARTS COUNTING)
Format: SM_XXXXX CR LF, where: _ - space, XXXXX – mass format
Response options:
SM_OK CR LF - command carried out
- command understood but not accessible at this moment (e.g. mode other than
SM_I CR LF
PARTS COUNTING)
ES CR LF - command not recognised (mass format incorrect)
Set target mass value (e.g. for DOSING)
Format: TV_XXXXX CR LF, where: _ - space, XXXXX - mass format
Response options:
TV_OK CR LF - command carried out
- command understood but not accessible at this moment (e.g. mode other than
TV_I CR LF
DOSING)
ES CR LF - command not recognised (mass format incorrect)
Set reference mass value (e.g. for DEVIATIONS)
Format: RM_XXXXX CR LF, where: _ - space, XXXXX – mass format
Response options:
RM_OK CR LF - command carried out
- command understood but not accessible at this moment (e.g. mode other than
RM_I CR LF
DEVIATIONS)
ES CR LF - command not recognised (mass format incorrect)
Value release
Format: SS CR LF
Response options:
SS_OK CR LF - command understood and in progress
Command's function is similar to function of PRINT button located on an overlay,
4-12 13
mass space
4-12 13
mass space
14 15 16
unit
14 15 16
unit
- 87 -
17 18
space CR
17 18
space CR
19
LF
19
LF