Device Status Indicators - X-Rite PANTONE i1 PRO 3 PLUS Manual De Uso

Device Status Indicator
12
The i1Pro 3 device is equipped with a device status indicator on its top housing. The
device status indicator provides feedback on the current status of the device, and
guides you through the measurement process.
General device status:
off The device is either not connected to your computer, or the latest
software to control the device is not installed or running on your
computer.
solid white The device is connected to power/USB.
pulsating white The device is connected and ready for measurement.
solid red The calibration of the device failed due to a hardware problem
(see troubleshooting section for further information).
short green pulse Indicates that the measurement button has been pressed and
the scanning motion can be started.
To avoid interference of the device status indicator with the measurement process, the
device status indicator is turned off during measurement.
EN
13