Publicidad
Idiomas disponibles
Idiomas disponibles
12
109843
Desk
METAL
BRACKET (HH)
9/16" LARGE HEAD SCREW (RR)
(8 used in this step)
- You will need someone's help in this step.
- Carefully place the Hutch on the 109843 Desk and 109848 48" Return Kit as shown.
- Fasten two METAL BRACKETS (HH) to the RIGHT END (A) and LEFT END (B) as shown.
NOTE:
Be sure to position the BRACKETS as shown. Follow the enlarged diagrams.
- Fasten the Hutch to the Tops. Use a 9/16" LARGE HEAD SCREW (RR) through each BRACKET and into the Tops.
NOTE:
There are no pre- -drilled holes in the Tops for the METAL BRACKETS. Use a little extra force
while starting these SCREWS.
NOTE:
The Hutch must be properly attached as shown in this step.
109871
109848
48" Return Kit
METAL
BRACKET (HH)
www.sauder.com/services
109843
109848
48" Return Kit
Desk
METAL
BRACKET (HH)
METAL
BRACKET (HH)
Publicidad
