16
Angled edge
Tab
- Insert three DIVIDERS (S) into the FOLDER TRAY (R) as shown in the top diagram. Push the tabs on the
DIVIDERS into the slots in the FOLDER TRAY.
NOTE: Be sure the angled edges of the DIVIDERS are positioned as shown. Follow the diagram.
- Slide two HANGERS (V) onto the back of the CD HOLDER (T) as shown in the bottom diagram. Follow the
diagram closely. Repeat this process for the FOLDER TRAY (R) and PENCIL CUP (U).
DIVIDER (S)
FOLDER
TRAY (R)
HANGER (V)
HANGER (V)
www.sauder.com/services
Tab
CD HOLDER (T)
109871