Descargar Imprimir esta página

Sauder Hutch 109871 Instrucciones De Montaje página 38

Publicidad

Idiomas disponibles

Idiomas disponibles

17
CAUTION: This Sauder unit
has been designed for the
weights shown in this step.
Exceeding these weights
could cause excessive
"sagging" of the part.
Extreme overloading could
cause failure of the part and
possible injury.
Only the Hutch is shown in this step.
- Hang the FOLDER TRAY (R), PENCIL CUP (U), and CD HOLDER (T) on the ACCESSORY WALL (P)
as shown. Use the HANGERS (V) on the back of each accessory. The accessories have been designed for office
supplies only.
- For long- -term care and maintenance of your unit, you may touch up the edges with the TOUCH- -UP PEN (Y).
- When moving the Desk and Hutch, remove the Hutch from the Desk. To do so, remove the SCREWS in the METAL
BRACKETS (HH) that attach the Desk Top. Then, with someone's help, lift the Hutch off of the Desk. Move the Desk
to its new location and attach the Hutch to the Desk.
- Please read the back page of the instruction booklet for important safety information.
This completes assembly. Use your favorite type of furniture polish on all finished surfaces to enhance the beauty of the finish.
Do not spray the polish directly onto the furniture. Spray the polish onto a cloth, then use the cloth to wipe the surface.
109871
60 lbs.
total
PENCIL
CUP (U)
CD HOLDER (T)
FOLDER
TRAY (R)
www.sauder.com/services
No load
ACCESSORY
WALL (P)

Publicidad

loading

Este manual también es adecuado para:

337501