Sauder Hutch 109871 Instrucciones De Montaje página 5

1
MINI TWIST-LOCK
FASTENER (AA)
TWIST-LOCK R
FASTENER (Z)
For assembly tips involving
this step, visit our web site
at: www.sauder.com/tips
Read each step through completely before beginning the step. This box "-" is provided as a check- -off box. As you
complete each task, check it off.
- To begin assembly, push a SAUDER TWIST-LOCK
- Next, push a SAUDER MINI TWIST-LOCK
NOTE: Be sure the TWIST-LOCK
Make sure the point is positioned as shown in the enlarged diagram. Do not tighten the
TWIST-LOCK
NOTE: If you need to remove a TWIST-LOCK
of the hole. Pull at the front and back edges, slowly working the FASTENER out of the hole.
R
LOWER
BACK (F)
SHELF (D)
R
FASTENER (AA) into the holes in the LOWER BACK (F).
R FASTENERS are positioned as shown in the enlarged diagrams.
R FASTENERS at this time.
www.sauder.com/services
MINI
R
TWIST-LOCK
FASTENER (AA)
R
FASTENER (Z) into the large holes in the SHELF (D).
R FASTENER from a hole, pull the FASTENER back out
Make sure this point
is in this location.
Dowel end
MINI TWIST-LOCK
FASTENER (AA)
TWIST-LOCK R
FASTENER (Z)
R
109871